Manual control from EV3 Brick

Program Manual Control from Brick

Select program "Brick Control"

• Push button "2" : On/Off motor A
• Push button "4" : Forward motor B&C
• Push button "5" : Backward motor B&C
• Push button "1"&"4" : Forward & Turn left motor B&C
• Push button "3"&"4" : Forward & Turn right motor B&C
• Push button "1"&"5" : Backward & Turn left motor B&C
• Push button "3"&"5" : Backward & Turn right motor B&C
• Push button "6" : Stop program

Note:

1. Need to select red selection button on Beacon Remote Control to be at Position #1 (top position)
2. Connect Motor A (small one) to port A 
3. Connect Motor B to port B
4. Connect Motor C to port C
5. Connect IR Sensor to port#1