Manual control from IR Remote

Program Manual IR Remote Control
or you may run IR Control directly from EV3 brick

• Select program "Remote Case1" for inverse direction of motor B&C
• Select "Remote Case2" for normal direction of motor B&C

• 0: Stop Motor A , Motor B&C 
• 1: Motor B&C (Turn Left)
• 2: Motor B&C (Turn Left backward) 
• 3: Motor B&C (Turn Right)
• 4: Motor B&C (Turn Right backward) 
• 5: Motor B&C (Forward)
• 8: Motor B&C (Backward) 
• 9: Motor A (On/Off)

Note:

1. Need to select red selection button on Beacon Remote Control to be at Position #1 (top position)
2. Connect Motor A (small one) to port A 
3. Connect Motor B to port B
4. Connect Motor C to port C
5. Connect IR Sensor to port#1